Salem, OR to Olympia, WASalem, OR to Olympia, WA (971) 339-4299
Schedule My Roof Assessment

Commercial IB Roof Systems

IB PVC roofing for complete reroofing, overlays and new construction. Flat Roof LLC helps commercial property owners across Portland, Vancouver and the I-5 corridor plan a durable, welded roof system.

Commercial properties only Salem to Olympia via I-5 OR CCB #226463 · WA FLATRRL762CK
Explore IB PVC roofing
IB PVC ROOFING / 01

A commercial PVC roof built for long-term service.

Flat Roof LLC offers IB Roof Systems PVC membranes for complete reroofing, roof overlays and new construction. IB has manufactured high-performance PVC membranes since 1978, with a focus on durability, reflectivity and keeping roofing materials in use longer.

The membrane is reinforced PVC, with hot-air-welded seams and compatible flashings for roof edges, drains, walls and rooftop equipment. Its formulation, weathering surface and reflective finish give building owners specific features to consider when comparing commercial roofing options.

01

Long-term roof ownership

A durable membrane and maintainable details can help extend roof service and reduce the disruption and material use associated with repeated replacement.

02

Reflective roof options

Reflective IB PVC finishes help reduce solar heat absorbed at the roof surface. The building, insulation, climate and selected membrane determine the effect on cooling demand.

03

A roof that supports future plans

Consider rooftop solar, equipment changes and end-of-life material recovery while planning the roof, rather than waiting until those projects arrive.

THREE WAYS WE INSTALL IB PVC / 02

Complete reroofing, overlays and new construction.

Flat Roof LLC plans the IB PVC installation around the condition of the building and the work it needs. Each project begins with a defined scope for the deck, insulation, attachment and roof details.

01COMPLETE REROOFING

Replace a roof that has reached its limit

Remove the roofing included in the replacement scope, address wet or damaged supporting materials, and install the new IB PVC system. This is the opportunity to correct drainage and rebuild worn details rather than cover them.

02ROOF OVERLAY

Install over a suitable existing roof

An IB PVC overlay can retain eligible existing materials and reduce tear-off waste. We first evaluate moisture, deck condition, attachment, roof layers and material compatibility to establish whether an overlay is appropriate.

03NEW CONSTRUCTION

Plan the roof with the building

Coordinate the IB PVC membrane with the structural deck, insulation, drainage, rooftop equipment and perimeter details. Planning these connections early helps keep the roofing scope aligned with the other trades.

FROM ASSESSMENT TO INSTALLATION / 03

Define the work, then build the roof.

Our work connects product selection with the actual conditions on your property, from the first inspection through the finished seams and details.

  1. 01
    Review the building

    Inspect the existing roof or new-construction plans, drainage, rooftop use, access and any evidence of moisture or damage.

  2. 02
    Select the IB assembly

    Specify the membrane, insulation, cover board or separation layer, attachment and compatible accessories for the project.

  3. 03
    Install and weld

    Prepare the supporting surface, secure the membrane, hot-air weld the seams and complete flashings around edges, drains and penetrations.

  4. 04
    Inspect and close out

    Check welds and completed details, document the work and review maintenance guidance and the applicable warranty documents.

WHAT IB PVC BRINGS TO THE ROOF / 04

Product features worth comparing.

IB’s Roof Resilience guide highlights these characteristics of its PVC membranes. The selected product and roof assembly establish the specifications for your project.

  1. 01
    A substantial weathering surface

    IB describes a weathering surface thicker than the ASTM minimum requirement. This is the exposed material above the reinforcement that faces sun and weather, making it a useful detail to compare alongside total sheet thickness.

  2. 02
    Consistent formulation for welding

    IB uses a common formulation on the top and bottom of its PVC membrane to support weldability. Hot-air-welded seams join adjacent sheets, while compatible accessories complete the roof transitions.

  3. 03
    Chemical-resistant PVC

    Chemical resistance is one reason to consider IB PVC for commercial buildings with changing uses or rooftop exposure. Identify the actual grease, exhaust or chemical involved and check the selected membrane’s compatibility.

  4. 04
    Reflectivity that works over time

    IB’s top finish is designed to help keep the membrane cleaner and preserve reflectivity. A reflective roof can reduce heat absorption, with energy performance depending on the building and its cooling needs.

  5. 05
    Fire-retardant formulation

    IB PVC is formulated with enhanced fire-retardant properties. The fire classification for a project applies to its tested roof assembly, including the supporting layers, rather than the membrane alone.

  6. 06
    Durability with routine care

    IB emphasizes weather resistance and low maintenance needs. Routine inspections, clear drains and timely attention to damaged seams or flashings remain important to keeping the installed roof in service.

Commercial roof drainage and membrane detail
MEMBRANE + DETAILSWelded seams, clear drainage and properly finished transitions work together.
YOUR IB PVC PROJECT / 05

Know what is included in your roof proposal.

A useful proposal identifies the product and the installation work, including what stays, what comes off and how the finished roof connects to the building.

01

Existing roof or building plans

  • Replacement, overlay or new construction
  • Deck condition and moisture findings
  • Drainage and roof access
02

Selected materials

  • IB PVC membrane and specified thickness
  • Insulation and supporting layers
  • Attachment method and accessories
03

Roof details

  • Hot-air-welded seams
  • Drains, walls, curbs and penetrations
  • Perimeter edges and terminations
04

Project closeout

  • Finished-work inspection and photos
  • Maintenance recommendations
  • Applicable written warranty terms
PLAN BEYOND THE NEXT ROOF / 06

Make room for solar and future rooftop use.

IB offers roof systems and mounting solutions that support rooftop solar. Coordinating the roof’s expected service life with a solar installation can help avoid removing and reinstalling equipment for an early reroof.

Vegetated roofs and other rooftop uses need their own waterproofing, drainage, structural and access design. Bring these plans into the roofing discussion early so the selected IB system and its details suit the intended use.

  • Solar mounting and penetration details
  • Roof and equipment service-life planning
  • Maintenance routes and access
  • Coordination with the building’s other trades
Commercial low-slope roof with rooftop equipment
Plan equipment, maintenance access and roof details together.
LONGER SERVICE, LESS WASTE / 07

Plan for the roof’s next use, too.

Keeping a roof in service longer can reduce replacement material use and tear-off waste. When replacement is needed, recycling options depend on the membrane’s condition, attachment and the receiving facility’s requirements.

Compare all service paths
IB RECYCLING OPTIONS
  • IB offers recycling coordination when an old IB PVC roof is replaced with new IB PVC
  • IB offers no-charge acceptance of eligible PVC membranes sent to its facilities
  • Vinyl Institute resources can help identify recyclers
  • Nationwide Foam provides another route to investigate for membrane and insulation recycling
CHECK BEFORE TEAR-OFF
  • IB currently excludes adhered PVC roofing from its recycling program
  • Confirm acceptance and preparation requirements with the receiving facility
  • Plan separation, packaging and transport before removal
  • Include handling and transport costs in the project scope
IB PVC QUESTIONS / 08

Questions about choosing and owning an IB PVC roof.

Start with the work your building needs, then compare the product, installation scope and long-term care.

Talk with Flat Roof LLC(971) 339-4299
01Does Flat Roof LLC install IB PVC roofing?

Yes. Flat Roof LLC offers IB Roof Systems PVC roofing for commercial complete reroofing, overlays and new construction across Portland, Vancouver and the I-5 corridor.

02What makes IB PVC different from other PVC products?

IB highlights its weathering-surface thickness, common top-and-bottom formulation for welding, reflective finish and long-term durability. Compare the exact membrane specifications, assembly, accessories and warranty offered for your building rather than the brand name alone.

03Can IB PVC go over my existing roof?

It can be an option when the existing roof is suitable for an overlay. Moisture, deck condition, existing layers, material compatibility, attachment and drainage all need to be evaluated first. An overlay is not a way to leave wet or failed materials unresolved.

04How long can an IB PVC roof last?

IB’s manufacturer guide describes the potential for 30-plus years of roof service. That is not a guaranteed lifespan for every installation. Product selection, installation, exposure, maintenance and building conditions affect the life of an individual roof.

05Will a reflective IB PVC roof lower cooling costs?

A reflective membrane can reduce solar heat absorbed by the roof and help reduce cooling demand. Actual savings depend on membrane color and condition, insulation, building use, climate and the heating and cooling system.

06Can an old IB PVC roof be recycled?

There are recycling options for eligible membranes, and IB can help coordinate recovery when old IB PVC is replaced with new IB PVC. Its current guidance excludes adhered PVC roofing. Confirm material acceptance, preparation and transport before scheduling removal.

07Can IB PVC support a rooftop solar project?

IB offers solar-compatible roofing systems and mounting solutions. The roof, structural loading, mounting details, access and expected service life should be coordinated with the solar design before installation.

08What warranty would my IB PVC roof have?

The proposed membrane, assembly and available manufacturer warranty should be identified in writing with your project scope. Coverage, term, inspection requirements and exclusions depend on the selected system and current program terms.

PLAN THE RIGHT PROJECT / 09
DISCUSS YOUR IB PVC ROOF / 10

Plan your commercial IB PVC roofing project.

Tell Flat Roof LLC where the property is, what roof it has now and whether you are planning a complete reroof, an overlay or new construction. We can review the conditions and define the next step.

Complete reroofing Roof overlays New construction
Business-hours emergency leak help(971) 339-4299
COMMERCIAL PROPERTY INTAKESchedule my roof assessment.Required fields are marked with an asterisk.
01 / CONTACT

Who should we follow up with?

02 / PROPERTY

Tell us about the property and roof.

Security verification

Cloudflare Turnstile helps protect this form from automated abuse. How this check handles data.

Loading security verification…

We’ll review your request and contact you before scheduling a site visit.

By submitting, you ask Flat Roof LLC to contact you about this property and request by phone or email. This is operational follow-up—not marketing consent. See our Privacy notice.